 |
 |
 |
 |
 |
| ITEM # | PART # | DESCRIPTION |
UNITS |
PRICE |
BUY NOW |
1 |
A10000B |
HANDLE ASSY. (Blue & White, Bracket included) - Aquabot, AB+RC, AB Turbo, AMAX Jr | ASSEMBLY |
$99.00 |
|
2 |
S1100B |
BRACKET FOR HANDLE (Blue) - all units except Merlin and Bravo | EACH |
$29.99 |
|
8 |
1105 |
SCREW (10-32, 7/8", Phil Pan Head) - For securing the Handle Bracket to the Body Assembly | EACH |
$1.20 |
|
9 |
2701 |
SCREW (#8, 11/16", Phil Pan Head) - To secure the Sideplate on the lower edge of the Body | EACH |
$1.20 |
|
10 |
2500 |
SCREW (#8, 1-1/4" Pan Head) - For securing the DC Pump's Back Plate Block to the Body Assembly | EACH |
$1.20 |
|
10 |
2500 |
SCREW (Pan head) - For securing all White Drive Motors, or Black Motors with Spacer Bracket | EACH |
$1.20 |
|
12 |
2100 |
P-CLIP (1/4", Plastic) - For securing the non-foam-insulated part of a 2-wire cable to the Body | EACH |
$1.20 |
|
12 |
2101 |
P-CLIP (5/16", Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body | EACH |
$1.20 |
|
12 |
2102 |
P-CLIP (7/16", Plastic) - For securing the foam-insulated part of a 2-wire cable to the Handle Assy. | EACH |
$1.20 |
|
12 |
2105 |
P-CLIP (1/2", Plastic) - For securing the Heat Shrink part of the 2-wire cable to the Handle Assy. | EACH |
$1.20 |
|
12 |
2106 |
P-CLIP (5/8", Plastic) - For securing the foam-insulated part of a 4-wire cable to the Handle Assy. | EACH |
$1.20 |
|
13 |
2700 |
SCREW (#8, 11/16", Phil Pan-Flat Head) - To secure a P-Clip whenever the hole is deep | EACH |
$1.20 |
|
13 |
2700 |
SCREW (#8, 11/16", Phil Pan-Flat Head) - To secure the upper part of the Sideplate on the Body | EACH |
$1.20 |
|
13 |
2700 |
SCREW (#8, 11/16", Phil Pan-Flat Head) - For securing the DC Pump Clamps to the Back Plate Bloc | EACH |
$1.20 |
|
14 |
2260 |
SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure a P-Clip when the hole is shallow | EACH |
$1.20 |
|
14 |
2260 |
SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the Top and Bottom of the Outlet closed | EACH |
$1.20 |
|
14 |
2260 |
SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the H-Float to the Bottom Lid | EACH |
$1.20 |
|
16 |
S7930 |
EZ-SWIVEL (Blue, Plastic, Small) - For detangling the 2-wire Cable Assembly | ASSEMBLY |
$43.98 |
|
16 |
S7935 |
EZ-SWIVEL (Blue, Plastic, Large) - For detangling the 4 or 7-wire Cable Assembly | ASSEMBLY |
$43.98 |
|
25 |
2230B |
OUTLET TOP (Top and Bottom) - For all units except those with an Outer Shell, Merlin, Bravo | 2 PIECES |
$28.00 |
|
29 |
2300 |
ANTI-ROLL BRACKETS (Plastic) - Install raised-up, on top of Body Assembly to prevent rolling | SET OF 4 |
$11.00 |
|
30 |
3402 |
LOCK-NUTS (Hex, Nylon insert) - For securing the Screws of the Anti-Roll Brackets | EACH |
$6.00 |
|
30 |
3402 |
LOCK-NUTS (Hex, Nylon insert) - For securing the Screws of the Grey Clamp attached to the Side P | EACH |
$6.00 |
|
31 |
2261 |
SCREW (M-5, Phil Bev Head) - To secure the Anti-Roll Brackets to the Body Assembly | EACH |
$1.20 |
|
36 |
9204BL |
LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lid to base of unit | SET OF 2 |
$3.50 |
|
38 |
2303 |
SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - To secure the Lock-Tabs to the Body Assembly | EACH |
$1.20 |
|
39 |
7133 |
LOCK-NUT (Nylon Insert, Hex) - To secure the Screws of the Lock-Tabs to the Body Assembly | EACH |
$0.80 |
|
51 |
2600 |
BUSHING (White, Plastic) - For use on all Side plates to lock-in Wheel Tube Assemblies | EACH |
$2.65 |
|
52 |
2610 |
BUSHING (White, Plastic) - For use on some Side plates to lock-in the Body's Pin Support | EACH |
$4.50 |
|
54 |
3500 |
SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Side Plate | EACH |
$2.65 |
|
55 |
3700 |
LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body's Pin Support | EACH |
$3.50 |
|
56 |
3506 |
STEPPED SLEEVE ROLLER (White) - Supports Drive Belt, installs on the upper Side Plate leg | EACH |
$2.65 |
|
57 |
3302 |
DRIVE BELTS (Tan) | PAIR |
$16.50 |
|
58 |
A3600 |
PULLEY ASSEMBLY (Short) - For most Residential units with White Drive Motors | EACH |
$26.50 |
|
Not Pictured |
3607 |
WASHER - For Pulley Assembly - install with rounded edges facing Drive Belts | EACH |
$5.50 |
|
60 |
A6001T |
PUMP MOTOR (Aquabot Turbo, Tempo, Aquamax Jr HT) | ASSEMBLED |
$209.99 |
|
61 |
4400 |
PROPELLER (Black) - For Pump Motor, tap onto half-circle shaped motor shaft. | EACH |
$11.56 |
|
69 |
300111 |
TUBING (Clear PVC, 3/16"ID x 5/16"OD) - Use to divert water from the DC Pump to the Piston Assembly | Per Ft. |
$1.05 |
|
70 |
300109 |
CLAMP (Grey, Plastic, Narrow) - Aquabot Turbo Solo / RC / T4, All Aquamax RC / Solo cleaners | EACH |
$2.20 |
|
77 |
S300090 |
PISTON ASSEMBLY (White, Plastic) - One Piston is used for Solo cleaners, Two are used for RC cleaners | EACH |
$65.00 |
|
78 |
300084 |
RUBBER TIP (White, Rubber) - Use at the bottom of the plunger of the Piston Assembly | EACH |
$2.20 |
|
Not Pictured |
2251 |
SCREW (8-18, 3/4", Phil No-head) - For securing Pump Motors to the Body Outlet Top | EACH |
$1.20 |
|
80 |
A4510T |
DRIVE MOTOR (White, Terminal Basin) - Aquabot Turbo, Tempo, Aquamax Junior HT | ASSEMBLED |
$299.99 |
|
83 |
4613 |
SPIRAL PIN (3/4", solid Stainless Steel) - For the shaft end of every Drive Motor, use Lock-Tite | EACH |
$1.20 |
|
82 |
4618 |
BRASS NUTS (Hex, small) - For attaching the Loop Connectors of wires to Brass Terminals | EACH |
$1.20 |
|
Not Pictured |
4619 |
LOOP CONNECTOR (Aluminum, crimp) - For attaching Motor wires to Brass Terminals | PAIR |
$1.20 |
|
84 |
5000 |
TERMINAL COVER (Plastic, Rectangle) - For sealing up the Basin in all White Drive Motors | EACH |
$2.10 |
|
85 |
4501 |
SCREW (5/8") - For sealing the Terminal Cover onto the Basin of all White Drive Motors | EACH |
$1.20 |
|
Not Pictured |
800001 |
PUTTY (Grey, Waterproof) - For waterproofing the Terminal Basin in all White Drive Motors | 1 Lb |
$9.50 |
|
90 |
A38205MG |
WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, AMAX Jr +) - Model 'G' | ASSEMBLY |
$65.50 |
|
91 |
11058 |
RETAINING RING (E-Clip) - New Style | EACH |
$3.50 |
|
92 |
3603 |
WASHER (Nylon, Flat) - For each end of the Wheel Tube | EACH |
$1.20 |
|
97 |
A2900 |
BRUSHES (Black Sponge Foam) - Aquabot, Aquabot Turbo, Aquamax Jr, Merlin, Bravo | PAIR |
$65.00 |
|
97 |
3002B |
BRUSHES (Blue Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Bravo, Ultramax ** | PAIR |
$75.00 |
|
99 |
3201 |
DRIVE TRACK (Blue) | EACH |
$21.00 |
|
99 |
3203 |
DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units | EACH |
$21.00 |
|
100 |
2675 |
MODEL G SPACER BRACKETS ** necessary with 'Model G' Drive Tracks | SET OF 4 |
$4.50 |
|
101 |
8200 |
FILTER BAG (Mesh) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV50/300, Jet's, UMAX ** | EACH |
$46.00 |
|
101 |
8100 |
FILTER BAG (Fine) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV 50/300, Jet's, UMAX ** | EACH |
$47.00 |
|
103 |
5300 |
FILTER SCREEN (White, Cage) - AB, AB Turbo, AB+RC, AMAX Jr, PHV 50/300 UMAX ** | EACH |
$26.50 |
|
104 |
2702 |
SCREW (#6, 11/16", Phil Pan-Flat Head, Pointed) - For securing the Filter Screen to the Body | EACH |
$1.20 |
|
105 |
A9200X |
BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot | ASSEMBLED |
$89.00 |
|
106 |
9305B-B |
INTAKE VALVE FLAP (Blue Plastic) - Aquabot, AB Turbo, AMAX Jr, UMAX, PHV 50/300 | EACH |
$4.34 |
|
108 |
S3103 |
H-FLOAT (Foam, Plastic, with Screws) - All wall-climbing units may need this to climb | ASSEMBLY |
$10.98 |
|
109 |
3104 |
SIDE POCKET FLOATS (White, Foam Rectangle Blocks)- Wall-climbing units may use them | PAIR |
$3.50 |
|
Not Pictured |
5173 |
WEIGHTS (Black, Coated, with Inserts and Screws) - Wall-climbing units may need them | PAIR |
$6.50 |
|
110 |
A7091 |
POWER SUPPLY (4-Pin Male, 7hr External Dial Timer, Radio RC) - AB Turbo Solo / RC | ASSEMBLED |
$351.50 |
|
111 |
7135 |
SOCKET ASSY. (4-Pin, Male, 4-Wire) - AB Turbo Solo, AB Turbo RC, Aquamax Biturbo) | ASSEMBLY |
$32.00 |
|
112 |
7005 |
FUSE HOLDER (Standard, Push & Turn style) - All units Residential and Commercial | ASSEMBLY |
$7.98 |
|
Not Pictured |
7101 |
FUSE (2.5 Amp, 250 Volt, Slow-Blow) - ABOT, AB Turbo, ABT RC/Solo, Merlin, Bravo | EACH |
$2.85 |
|
113 |
7111 |
RESET SWITCH (Standard, Black button, 2-Wire) - ABOT Turbo, AB Turbo Solo/RC | EACH |
$11.00 |
|
114 |
7106 |
LIGHTED SWITCH (Standard, Red, 3-Wire) - For every Power Supply | EACH |
$7.70 |
|
117 |
7041 |
HANDLE (Plastic, with Screws, Nuts, and Star Washers) - All ABOT, all AMAX, all PHV | ASSEMBLY |
$5.88 |
|
117 |
7041A |
HANDLE (Rubber, with Holders, Screws, and Nuts) - Ultramax, UMAX Jr ..and most others | ASSEMBLY |
$5.88 |
|
118 |
7102 |
CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - For all Power Supplies | EACH |
$11.00 |
|
119 |
7074 |
TIMER 7 HOUR (External, Dial, 120 Volt) - AB Turbo, AB Turbo Solo, AB Turbo RC | EACH |
$50.00 |
|
26 |
A22000-W2H |
BODY ASSY. (White, w/ Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - AB Turbo RC/Solo | ASSEMBLED |
$120.00 |
|
26 |
A22000 |
BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquabot | ASSEMBLED |
$120.00 |
|
91 |
A2207 |
AIR FILTER ASSEMBLY (White, Plastic) - Used on any unit with a DC Pump | ASSEMBLY |
$50.00 |
|
71 |
300096 |
TUBING (Clear PVC, thick diameter) - To supply the DC Pump with air from the Air Filter | PER FOOT |
$1.20 |
|
109 |
S300092 |
DC PUMP MOTOR (Single, no Gate, 2-Wire) - Used in units with a one-way Solo RC | EACH |
$70.00 |
|
110 |
S300093 |
DC PUMP MOTOR (Dual, with Gate, 2-Wire) - Used in units with a two-way RC | EACH |
$70.00 |
|
75 |
300109 |
CLAMP (Grey, Plastic) - To hold the DC Pump to the Back-Plate and the Piston to the Side Plate | EACH |
$1.95 |
|
72 |
300107 |
BACK PLATE BLOCK (Grey, 4 holes) - To support the DC Pump inside of the unit | EACH |
$1.95 |
|
Not Pictured |
6204 |
SPACER (Plastic, cylinder) - Use between the DC Pump Back Plate and the Body Assembly | EACH |
$0.70 |
|
Not Pictured |
7109 |
WASHER (St.Steel) - For use with the Pan Head Screw against Body Assembly and Grey Piston Cla | EACH |
$1.20 |
|
74 |
2301 |
SCREW (10-32, 1/2" Phil Pan Head) - For securing the Grey Clamp and Piston on the Side Plate | EACH |
$1.20 |
|
Not Pictured |
3007 |
CLIMBING RINGS (Light Blue PVA, 1" thick) - Use on any unit, fitted over Rubber Brushes ** | SET OF 4 |
$25.00 |
|
112 |
7205 |
FUSE HOLDER (Alternate, Phillips Head style) - All units, only when specified by AP Service | ASSEMBLY |
$8.00 |
|
Not Pictured |
A220200 |
RECEIVER (NEW, Radio, 2-Way) - Aquabot Turbo Solo, Aquabot Turbo RC, AMAX Bit RC | EACH |
$199.95 |
|
116 |
220105C |
TRANSMITTER (Radio, 2way, Yellow w/ 2▲) - ABT RC's, AMAX RC's **A220200 Receiver | ASSEMBLED |
$65.00 |
|
119 |
7130 |
TIMER 7 HOUR (Internal, Fixed, 120 Volt) - AB Turbo, AB Turbo Solo, AB Turbo RC | EACH |
$50.00 |
