ITEM # PART #
DESCRIPTION
UNITS
PRICE
BUY NOW
1
A10000B
 HANDLE ASSY. (Blue & White, Bracket included) - Aquabot, AB+RC, AB Turbo, AMAX Jr
ASSEMBLY
$99.00

2
S1100B
 BRACKET FOR HANDLE (Blue) - all units except Merlin and Bravo
EACH
$29.99

8
1105
 SCREW (10-32, 7/8", Phil Pan Head) - For securing the Handle Bracket to the Body Assembly
EACH
$1.20

9
2701
 SCREW (#8, 11/16", Phil Pan Head) - To secure the Sideplate on the lower edge of the Body
EACH
$1.20

10
2500
 SCREW (Pan head) - For securing all White Drive Motors, or Black Motors with Spacer Bracket
EACH
$1.20

12
2100
 P-CLIP (1/4", Plastic) - For securing the non-foam-insulated part of a 2-wire cable to the Body
EACH
$1.20

12
2101
 P-CLIP (5/16", Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body
EACH
$1.20

12
2102
 P-CLIP (7/16", Plastic) - For securing the foam-insulated part of a 2-wire cable to the Handle Assy.
EACH
$1.20

12
2105
 P-CLIP (1/2", Plastic) - For securing the Heat Shrink part of the 2-wire cable to the Handle Assy.
EACH
$1.20

12
2106
 P-CLIP (5/8", Plastic) - For securing the foam-insulated part of a 4-wire cable to the Handle Assy.
EACH
$1.20

13
2700
 SCREW (#8, 11/16", Phil Pan-Flat Head) - To secure a P-Clip whenever the hole is deep
EACH
$1.20

13
2700
 SCREW (#8, 11/16", Phil Pan-Flat Head) - To secure the upper part of the Sideplate on the Body
EACH
$1.20

14
2260
 SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure a P-Clip when the hole is shallow
EACH
$1.20

14
2260
 SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the Top and Bottom of the Outlet closed
EACH
$1.20

14
2260
 SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the H-Float to the Bottom Lid
EACH
$1.20

15
1601
 PLUG (3-Pin, Female, 2-Wire) - Aquabot, AB Turbo, AMAX Jr HT/+, AMAX, Merlin, Bravo
ASSEMBLY
$14.00

16
S7930
 EZ-SWIVEL (Blue, Plastic, Small) - For detangling the 2-wire Cable Assembly
ASSEMBLY
$43.98

16
S7935
 EZ-SWIVEL (Blue, Plastic, Large) - For detangling the 4 or 7-wire Cable Assembly
ASSEMBLY
$43.98

25
2230B
 OUTLET TOP (Top and Bottom) - For all units except those with an Outer Shell, Merlin, Bravo
2 PIECES
$28.00

29
2300
 ANTI-ROLL BRACKETS (Plastic) - Install raised-up, on top of Body Assembly to prevent rolling
SET OF 4
$11.00

30
3402
 LOCK-NUTS (Hex, Nylon insert) -   For securing the Screws of the Anti-Roll Brackets
EACH
$6.00

31
2261
 SCREW (M-5, Phil Bev Head) - To secure the Anti-Roll Brackets to the Body Assembly
EACH
$1.20

36
9204BL
 LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lid to base of unit
SET OF 2
$3.50

38
2303
 SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - To secure the Lock-Tabs to the Body Assembly
EACH
$1.20

39
7133
 LOCK-NUT (Nylon Insert, Hex) - To secure the Screws of the Lock-Tabs to the Body Assembly
EACH
$0.80

45
3400B
 SIDE PLATE
EACH
$26.50

51
2600
 BUSHING (White, Plastic) - For use on all Side plates to lock-in Wheel Tube Assemblies
EACH
$2.65

52
2610
 BUSHING (White, Plastic) - For use on some Side plates to lock-in the Body's Pin Support
EACH
$4.50

54
3500
 SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Side Plate
EACH
$2.65

55
3700
 LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body's Pin Support
EACH
$3.50

56
3506
 STEPPED SLEEVE ROLLER (White) - Supports Drive Belt, installs on the upper Side Plate leg
EACH
$2.65

57
3302
 DRIVE BELTS (Tan)
PAIR
$16.50

58
A3600
 PULLEY ASSEMBLY (Short) - For most Residential units with White Drive Motors
EACH
$26.50

Not Pictured
3607
 WASHER - For Pulley Assembly - install with rounded edges facing Drive Belts
EACH
$5.50

60
A6001T
 PUMP MOTOR (Aquabot Turbo, Aquabot Turbo, Aquamax Jr HT)
ASSEMBLED
$209.99

61
4400
 PROPELLER (Black) - For Pump Motor, tap onto half-circle shaped motor shaft.
EACH
$11.56

Not Pictured
2251
 SCREW (8-18, 3/4", Phil No-head) - For securing Pump Motors to the Body Outlet Top
EACH
$1.20

80
A4510T
 DRIVE MOTOR (White, Terminal Basin) - Aquabot Turbo, Aquabot Turbo, Aquamax Junior HT
ASSEMBLED
$299.99

83
4613
 SPIRAL PIN (3/4", solid Stainless Steel) - For the shaft end of every Drive Motor, use Lock-Tite
EACH
$1.20

82
4618
 BRASS NUTS (Hex, small) - For attaching the Loop Connectors of wires to Brass Terminals
EACH
$1.20

Not Pictured
4619
 LOOP CONNECTOR (Aluminum, crimp) - For attaching Motor wires to Brass Terminals
PAIR
$1.20

84
5000
 TERMINAL COVER (Plastic, Rectangle) - For sealing up the Basin in all White Drive Motors
EACH
$2.10

85
4501
 SCREW (5/8") - For sealing the Terminal Cover onto the Basin of all White Drive Motors
EACH
$1.20

Not Pictured
800001
 PUTTY (Grey, Waterproof) - For waterproofing the Terminal Basin in all White Drive Motors
1 Lb
$9.50

90
A38205MG
 WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, AMAX Jr +) - Model 'G'
ASSEMBLY
$65.50

91
11058
 RETAINING RING (E-Clip) - New Style
EACH
$3.50

92
3603
 WASHER (Nylon, Flat) - For each end of the Wheel Tube
EACH
$1.20

97
A2900
 BRUSHES (Black Sponge Foam) - Aquabot, Aquabot Turbo, Aquamax Jr, Merlin, Bravo
PAIR
$65.00

97
3002B
 BRUSHES (Blue Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Bravo, Ultramax **
PAIR
$75.00

99
3201
 DRIVE TRACK (Blue)
EACH
$21.00

99
3203
 DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units
EACH
$21.00

100
2675
 MODEL G SPACER BRACKETS   ** necessary with 'Model G' Drive Tracks
SET OF 4
$4.50

101
8200
 FILTER BAG (Mesh) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV50/300, Jet's, UMAX **
EACH
$46.00

101
8100
 FILTER BAG (Fine) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV 50/300, Jet's, UMAX **
EACH
$47.00

103
5300
 FILTER SCREEN (White, Cage) - AB, AB Turbo, AB+RC, AMAX Jr, PHV 50/300 UMAX **
EACH
$26.50

104
2702
 SCREW (#6, 11/16", Phil Pan-Flat Head, Pointed) - For securing the Filter Screen to the Body
EACH
$1.20

105
A9200X
 BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot
ASSEMBLED
$89.00

106
9305B-B
 INTAKE VALVE FLAP (Blue Plastic) - Aquabot, AB Turbo, AMAX Jr, UMAX, PHV 50/300
EACH
$4.34

108
S3103
 H-FLOAT (Foam, Plastic, with Screws) - All wall-climbing units may need this to climb
ASSEMBLY
$10.98

109
3104
 SIDE POCKET FLOATS (White, Foam Rectangle Blocks)- Wall-climbing units may use them
PAIR
$3.50

Not Pictured
5173
 WEIGHTS (Black, Coated, with Inserts and Screws) - Wall-climbing units may need them
PAIR
$6.50

110
7073
 POWER SUPPLY (3-Prong, Male Socket, 7hr External Dial Timer) -  Aquabot Turbo
ASSEMBLED
$185.00

112
7005
 FUSE HOLDER (Standard, Push & Turn style) - All units Residential and Commercial
ASSEMBLY
$7.98

Not Pictured
7101
 FUSE (2.5 Amp, 250 Volt, Slow-Blow) - ABOT, AB Turbo, ABT RC/Solo, Merlin, Bravo
EACH
$2.85

113
7111
 RESET SWITCH (Standard, Black button, 2-Wire) - ABOT Turbo, AB Turbo Solo/RC
EACH
$11.00

114
7106
 LIGHTED SWITCH (Standard, Red, 3-Wire) - For every Power Supply
EACH
$7.70

117
7041
 HANDLE (Plastic, with Screws, Nuts, and Star Washers) - All ABOT, all AMAX, all PHV
ASSEMBLY
$5.88

118
7102
 CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - For all Power Supplies
EACH
$11.00

119
7074
 TIMER 7 HOUR (External, Dial, 120 Volt) - AB Turbo, AB Turbo Solo, AB Turbo RC
EACH
$50.00

26
A22000
 BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquabot
ASSEMBLED
$120.00

Not Pictured
3007
 CLIMBING RINGS (Light Blue PVA, 1" thick) - Use on any unit, fitted over Rubber Brushes **
SET OF 4
$25.00

112
7205
 FUSE HOLDER (Alternate, Phillips Head style) - All units, only when specified by AP Service
ASSEMBLY
$8.00

119
7130
 TIMER 7 HOUR (Internal, Fixed, 120 Volt) - AB Turbo, AB Turbo Solo, AB Turbo RC
EACH
$50.00