Item #
Part #
 ITEM NAME  ( Description )  -  Cleaner Model(s) it belongs to
Units
Price
Buy Now
1
A10000WT
 HANDLE ASSY. (Bright White, Bracket included) - Aquabot Turbo T, Aquabot Turbo T4 (version 2006)
EACH
$99.00

2
S1100WT
 HANDLE BRACKET (Bright White) - Aquabot Turbo T4 (version 2006)
EACH
$29.99

8
1105
 SCREW (10-32, 7/8", Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly
EACH
$1.20

9
2701
 SCREW (#8, 11/16", Phil Pan Head) - Use to fasten Pump Motor
EACH
$1.20

12
2109
 P-CLIP (Blue, Coated Steel) - Use to fasten the Cable to the Handle of the Aquabot Turbo T, T2, T4
EACH
$2.30

13
2700
 SCREWS (#8, 11/16", Phil Pan-Flat Head) - Use to fasten P-Clips, and Drive Motors
EACH
$1.20

14
2260
 SCREWS (#6, 7/16", Phil Pan-Flat Head) - Use for P-Clips, Outlet Top, and H-Float
EACH
$1.20

15
1640E
 PLUG (7-Pin, Male, used for 5-Wire Cable) - Aquabot Turbo T4 (version 2006)
EACH
$45.00

16
S7935
 EZ-SWIVEL (For 5-wire Cable) - Can be used on 7-wire Cable Assembly
ASSEMBLY
$43.98

17
A16675
 CABLE ASSY. (5-Wire, 75 Foot, Floating) - Aquabot Turbo T4 (version 2006)
EACH
$435.00

NA
2250WT
 OUTLET RING (Bright White, Ring only, does not include Top dome)
EACH
$8.75

25
2230WT-1
 OUTLET TOP (Bright White, Top dome only, does not include bottom Ring)
EACH
$28.00

26
A2005BL2
 BODY ASSY. (Blue, with Lock Tabs, Outlet Ring, Inserts) - Aquabot Turbo T4 (version 2006)
EACH
$135.00

30
SP3402
 LOCK-NUTS (Hex, Nylon insert, for various uses: Sideplate Bolts, Anti-Roll Brackets, Pole Handle Assy.)
SET OF 8
$6.00

36
SP9204W
 LOCK-TABS (White, Plastic) - For All Body Assemblies, used to hold Bottom Lids to base of cleaners
SET OF 2
$3.50

38
2303
 SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly
EACH
$1.20

39
7133
 LOCK-NUT (Nylon Insert, Hex) - Use to fasten the Screws of the Lock-Tabs
EACH
$0.80

40
1628
 GROMMET (Rubber) - Use around Cable Assembly on Body
EACH
$2.35

42
2661
 BUSHING (Black, Plastic, Use at end of Wheeltube Axle)
EACH
$2.35

45
S3400WT-6H
 SIDEPLATE (Bright White, 4 holes for Bolts) - Aquabot Turbo T4 (version 2006)
EACH
$29.99

49
SP3401
 SCREW (Bolts, Long, For Sideplate) - Aquabot Plus RC, Aquabot Ultra, All Aquamax & Ultramax units
SET OF 8
$8.99

51
2600BK
 BUSHING (Black, Plastic) - Aquabot Turbo T4 (version 2006)
EACH
$2.65

55
3700
 LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body Assembly Pin Support
EACH
$3.50

56
3506
 STEPPED SLEEVE ROLLER (White, Thicker end supports Drive Belts, Install on upper Sideplate legs)
EACH
$2.65

57
SP3302
 DRIVE BELTS (Tan)
PAIR
$16.50

58
A3605
 PULLEY ASSEMBLY (~ 2.75 inches long)
EACH
$32.00

NA
3607
 WASHER (Use on Pulley Assembly, Rounded edges facing inward)
EACH
$5.50

NA
3397WT
 NOZZLE BRACKET (White, Supports Drive Track, holds Nozzle in place)
EACH
$5.50

NA
3398WT
 NOZZLE (White, Snaps into Nozzle Bracket, connects to Poly Tubing for power washing under cleaner)
EACH
$5.50

60
A6005-03
 PUMP MOTOR (Aquabot Turbo T4) (version 2006)
EACH
$209.99

61
4402
 PROPELLER - Aquabot Turbo T4 (version 2006)
EACH
$11.56

63
6027
 IMPELLER (Red) - Aquabot Turbo T4 (version 2006)
EACH
$12.00

64
6028
 IMPELLER HOUSING (Red) - Aquabot Turbo T4 (version 2006)
EACH
$12.00

65
300099
 TUBING (Clear PVC, 5/16"ID x 1/2"OD) - Use to divert water from the Impeller to the Nozzle Bracket
PER FOOT
$1.04

80
A8546
 DRIVE MOTOR (Blue, Master Motor, bare wire leads for Slave Motor) - Aquabot Turbo T4 (version 2006)
EACH
$329.00

80
A8547
 DRIVE MOTOR (Green, Slave Motor, bare wire leads for Master Motor) - Aquabot Turbo T4 (version 2006)
EACH
$295.00

NA
3101
 FLOAT (Place under Drive Motor)
EACH
$1.60

86
SP5474
 SHRINKABLE BUTT CONNECTORS (Light Blue, crimp closed and heat shrink to seal)
PAIR
$1.20

90
A38010
 WHEEL TUBE ASSY. (NEW, Aquabot Turbo T4) (version 2006)
EACH

$103.00

NA
SP11087
 CLUTCH SPACER (2 pieces per Wheeltube) - Aquabot Turbo T2 / T4 (version 2006)
EACH
$5.25

91
11059
 RETAINING RING (C-Clip, requires Snap-Ring Pliers) - Aquabot Turbo T4 (version 2006)
EACH
$3.50

92
3603
 WASHER (Nylon, Flat) - Aquabot Turbo T4 (version 2006)
EACH
$1.20

97
SP3018BL
 SUPER EZ-BRUSHES (Blue, cut in half, Short) - Aquabot Turbo T2, T4 (version 2006)
SET OF 4
$75.00

99
3203
 DRIVE TRACK with TRACTION TABS (Blue)
EACH
$21.00

101
8100
 FILTER BAG (Fine, for small debris)
EACH
$47.00

101
8200
 FILTER BAG (Mesh, for large debris)
EACH
$46.00

103
A5080
 FILTER SCREEN (Blue, Rounded cage) - Aquabot Turbo T, T2, T4 (version 2006)
EACH
$26.50

103
SP5310
 FILTER SCREEN (NEW, Blue, Folding Cage with Attachment Strings) - Aquabot Turbo T, T2, T4 (ver 2006)
EACH
$26.50

105
A9200XWB
 BOTTOM LID ASSY. (Blue, W-shaped Wire Frame) - Aquabot Turbo T4 (version 2006)
EACH
$89.00

106
9305BL
 INTAKE VALVE FLAP (Blue Plastic) - Aquabot Turbo T4 (version 2006)
EACH
$4.34

108
S3103
 H-FLOAT (Foam, Plastic, with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough
ASSEMBLY
$10.98

110
A7181C
 POWER SUPPLY (7-Pin, 7hr External Digital Timer) -  Aquabot Turbo T4 (version 2006)
EACH
$351.50

111
7149E
 SOCKET ASSY. (7-Pin, Male, 5-Wire) - Aquabot Turbo T4 (version 2006)
EACH
$34.00

112
7206
 FUSE HOLDER (MINI, Phillips Head style) - Aquabot Turbo T4 (version 2006)
EACH
$7.68

7211
 FUSE (3 Amp, MINI, 250 Volt, Slow-Blow) - Aquabot Turbo T4 (version 2006)
EACH
$3.00

114
7208
 ON / OFF SWITCH (Thin, Red, 3-Wire) - Use for Power Supply with Dial or Digital Timer
EACH
$7.70

115
7023
 ANTENNA (4", only authorized technician should install included Hardware) - Aquabot Turbo T4 (version 2006)
EACH
$11.50

116
220114C
 TRANSMITTER (Radio RC, Grey & Yellow/ Blue▲▲▲/ Red LED light) - Aquabot Turbo T4, Ultramax units  FOR NEW Units - Ultramax uses A220203FCC Receiver ///  Turbo T4 uses A220204FCC Receiver
EACH
$89.00

117
7041A
 HANDLE (Plastic, with Hardware) 
ASSEMBLY
$5.88

118
7102
 CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White)
EACH
$11.00

119
7074D
 DIGITAL TIMER (NEW, Front Digital display, 1-7 hours Adjustable) - Aquabot Turbo T, T2, T4 (ver 2006)
EACH
$50.00